• Сфера Самвела Мовсисяна
  • Сфера с большими кругами Самвела Мовсисяна
  • Куб вписанный в шар Самвела Мовсисяна
  • Четырехугольная пирамида вписанная в шар Самвела Мовсисяна

Who is online

We have 590 guests and no members online

Geometric Tutorial solid geometry

Technical specification
Geometrical work book/teaching guide "Nane"
“Шар” Teaching model "Ball"

Геометрическое учебное пособие по стереометрии The proposed model extends and complements already well-known collection of educational models “NANE”, which consists of a set of pyramids, prisms, cylinders, cones. With these models and the model"Ball" it is possible to demonstrate the full course of stereometry.The given model allows showing various combinations of the ball with other geometric bodies and obviously demonstrating the solution of different spatial three T dimensional/3D-problems. Thus, the opportunity is given to learn the section of stereometry"Ball" efficiently.

The complete model "Ball" includes the following components.

1. Three pairs of rings with different diameters.
Кольца разных диаметров от учебного пособия

2. The cluster of six identical, fixed in one point of the rods, whichhave telescopic mode of functioning.
6-ти стержневой пучок
3. Four-legged cluster.
4. Three-legged clusters (4 pieces).
5. Additional bar/rod to show the height of the inscribed pyramid.
6. The base on which the whole model is consolidated.

Подставка от модели

The model should be used worthwhile in accordance with regular succession of the presentation of the course material on stereometry textbook.

The display of the ball model using two pairs of corresponding rings (Drawing/Fig. 1)


The first structure denoted in the Fig. 1 we mortise into the basement. Then the ring, which is located inside, is inserted into the mortise/groove. 

We reinforce the middle rings into the deepness of the bigger ring meant for it (Fig. 2). 
Fig.2 shows the cross-section areas: great circles and two other circles.


We fasten the cluster of six rods using the cramps (Fig. 3), and we obtain the center, the diameter, the radius, the segment, the sector of the ball.


With the help of three – legged clusters inside the ball we assemble the inscribed cube, rectangular parallelepiped (Fig. 4).


We assemble the inscribed tetragonal pyramid with the help of four – legged clusters (Fig. 5). In this construction is used such an auxiliary rod which we vertically fix with one ring to the top of the pyramid, and with the other ring we attach to the edge of the groove. After that we build the basis for what we use two three – legged clusters. Having constructed the basis we will see that from each cluster remains one free rod. We fix them in the middle of an auxiliary rod.


To obtain the triangle pyramid we closely attach one to each other. The basement is constructed similarly to the previous case (Fig. 6).


To display the inscribed cone the four – legged clusters is used (Fig. 7) and one middle ring.


With the help of inscribed into each other small rings it is possible to show two versions of the inscribed full-sphere – into a cube and pyramid (Fig. 8-9).

модель  модель  

Example of the task solution.

The regular triangular pyramid with height of h and basement side of a is entered into the ball.



On the model of Fig. 10 
The radius of the ball OA=R,
Radius of the circle described around the basis О1А=a/√3,
The height of the pyramid DO=h, OO1=h-R.
For a rectangular triangle of OAO1 according to the Pythagorean theorem R2=(h-R2)+a2/3, R=(h2+a2/3)/ 2h
The possibilities of this model aren't limited with this. Lots of options of the model usage are opening in front of you, which stay in your imagination.

model kit "Ball"

1. Три пары колец с разными диаметрами


2. Шестистержневой пучок


3. Четырехстержневый пучок (1 штука)

Четырехстержневый пучок

4. Трехстержневые пучки (4 штуки).

Трехстержневые пучки

5. Дополнительный стержень для показа высоты вписанной пирамиды.

Дополнительный стержень для показа высоты вписанной пирамиды

6. Основание, на котором закрепляется вся модель.

Основание, на котором закрепляется вся модель.

Who is online